5 - 10 TC75x User Guide for Android Version 6.0.1
e. Scan the bar code below to place the RS6000 in HID mode.
Figure 5-17 RS6000 Bluetooth HID Bar Code
4. Remove the battery from the RS6000.
5. Re-install the battery into the RS6000.
6. Align the NFC icon on the RS6000 with the NFC antenna on the TC70x/TC75x.
Figure 5-18 Align NFC Antennas
The RS6000 Status LED blinks blue indicating that the RS6000 is attempting to establish connection with the
TC70x/TC75x. When connection is established, the Status LED turns off and the RS6000 emits a single string
of low/high beeps.
A notification appears on the screen and the icon appears in the Status bar.
Pairing Using Simple Serial Interface
To pair the RS507/RS6000 with the TC70x/TC75x using SSI.
1. On the TC70x/TC75x touch .
2. Touch .
To Next Page
Loading...
