Accessories 7 - 33
Snap-On DEX Cable
The Snap-On DEX Cable snaps on to the back of the TC70x/TC75x and removes easily when not in use. When
attached to the TC70x/TC75x the Snap-On DEX Cable provides electronic data exchange with devices such as
vending machines.
Connecting to Device
1. Align the top mounting points on the cable with the mounting slots on the TC70x/TC75x.
Figure 7-31 Cable Installation
2. Rotate the cable down and press until it snaps into place. Magnetics hold the cable to the TC70x/TC75x.
Figure 7-32 Cable Attached to Device
DEX Communication
1. Connect the Snap-On DEX Cable to the TC70x/TC75x.
2. Connect the DEX connector of the cable to a device such as a vending machine.
To Next Page
Loading...
