CHAPTER 1 GETTING STARTED
This chapter provides information for getting the device up and running for the first time.
Unpacking
1. Carefully remove all protective material from the TC70x/TC75x and save the shipping container for later
storage and shipping.
2. Verify that the following were received:
• touch computer
• 4,620 mAh PowerPercision+ Lithium-ion battery
• Hand strap
• Regulatory Guide.
3. Inspect the equipment for damage. If any equipment is missing or damaged, contact the Global Customer
Support center immediately.
4. Prior to using the device for the first time, remove the protective shipping film that covers the scan window,
display and camera window.
To Next Page
Loading...
