ZKTeco SpeedFace-V3L User Manual

SpeedFace-V3L User Manual
Page | 54 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Note: After successfully adding the WIFI manually, follow the same process to
search for the added Wi-Fi name.
 Advanced Setting
On the Wi-Fi Settings interface, tap on Advanced to set the relevant
parameters as required.
Tap on Add Wi-Fi Network to add
the Wi-Fi manually.
On this interface, enter the Wi-Fi
network parameters. (The added
network must exist.)

ZKTeco SpeedFace-V3L Specifications

General

Display type	LCD
Screen shape	Flat
Built-in display	Yes
Display diagonal	2.4 \
Display size (HxV)	240 x 320 mm
Internal memory	256 GB
Processor cores	2
Internal storage capacity	512 GB
Operating system installed	Linux
Type	Face recognition terminal
Access code reader	-
Authentication type	Biometric, Face recognition
Access chip/card reader	No
Face recognition distance	0.5 - 2 m
False Rejection Rate (FRR)	0.02 %
False Acceptance Rate (FAR)	0.01 %
International Protection (IP) code	IP65
Operating temperature (T-T)	-5 - 45 °C
Total megapixels	1 MP
RS-485 ports	1
Package weight	800 g

Weight and Dimensions

Depth	58.5 mm
Width	185 mm
Height	20 mm
Weight	300 g