ZKTeco SpeedFace-V3L User Manual

SpeedFace-V3L User Manual
Page | 55 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Function Description
Function Name Description
DHCP
Dynamic Host Configuration Protocol (DHCP)
dynamically allocates IP addresses to network clients. If
the DHCP is enabled, then the IP cannot be set manually.
IP Address
The IP address for the Wi-Fi
network, the default is
0.0.0.0. It can be modified according to the network
availability.
Subnet Mask
The default Subnet Mask of the Wi-Fi
network is
255.255.255.0. It can be modified according to the
network availability.
Gateway
The Default Gateway address is 0.0.0.0. It can be
modified according to the network availability.

ZKTeco SpeedFace-V3L Specifications

General

Display type	LCD
Screen shape	Flat
Built-in display	Yes
Display diagonal	2.4 \
Display size (HxV)	240 x 320 mm
Internal memory	256 GB
Processor cores	2
Internal storage capacity	512 GB
Operating system installed	Linux
Type	Face recognition terminal
Access code reader	-
Authentication type	Biometric, Face recognition
Access chip/card reader	No
Face recognition distance	0.5 - 2 m
False Rejection Rate (FRR)	0.02 %
False Acceptance Rate (FAR)	0.01 %
International Protection (IP) code	IP65
Operating temperature (T-T)	-5 - 45 °C
Total megapixels	1 MP
RS-485 ports	1
Package weight	800 g

Weight and Dimensions

Depth	58.5 mm
Width	185 mm
Height	20 mm
Weight	300 g