Zmorph VX User Manual

3D printing workow
56
Choose the "Mainte-
nance" from the LCD
touchscreen menu.
Choose "Load Filament". Choose PARK TOOL, wait
for the machine to posi-
tion the toolhead. When
done, choose "PLA" to
preheat the material.
To preheat the extruder, follow these steps.
Take off the front cover. Straighten the tip of la-
ment up or cut its end.
Wait till extruder reaches
the proper temperature.
The yellow HEATING sign
will change colour from
yellow to green.
NOTE: The "PREHEAT PLA" button will heat the nozzle to 200°C and the "PREHEAT ABS"
to 235°C.
Insert the lament into
the left side guide hole
on top of the extruder.
Tap the LOAD/UNLOAD
menu.
Tap the bottom arrow
on the screen to feed
80 mm of the lament.
Choose down arrow with
LEFT description to do
that.

Zmorph VX Specifications

General

Brand	Zmorph
Model	VX
Category	3D Printers
Language	English