Zmorph VX User Manual

3D printing workow
69
Choose NONE option. Choose APPLY. Printer will ask which of
the line is closest to the
best result 1 or 5. Pick
one and tap NEXT.
NOTE: If none of the printed lines is proper, please follow these steps:
The machine will prepare
another 5 lines, depend-
ing on the choice - lower
(1) or higher (5).
Select the best one
by pressing their cor-
responding numbers
visible on the screen and
clicking "APPLY".
Calibration completed.
Detach B the cable.
If after the second round
of calibration the user
still decides that none
of the lines are accurate,
the machine will show
a warning screen and
advise to repeat the auto-
matic calibration process
or to perform the manual
calibration.
NOTE: If meeting calibration issues or autocalibration
doesn’t work, please contact Technical Support.

Zmorph VX Specifications

General

Brand	Zmorph
Model	VX
Category	3D Printers
Language	English