Zoom F3 - Connecting Input Equipment; Connecting Mics; Connecting Line Level Equipment

Connecting input equipment
Connecting mics and other equipment to Inputs 1 and 2
The F3 has 2 inputs (1 and 2) that can be used to record to corresponding tracks. Mics and other equipment
can be connected to Inputs 1 and 2 and recorded to corresponding tracks.
■ Connecting mics
Connect dynamic and condenser mics with XLR plugs to Inputs 1 and 2.
• When connecting mics, set the Input Source to Mic. (→ Setting input sources)
• Phantom power (+24 V/+48 V) can be supplied to condenser mics. (→ Setting input sources)
■ Connecting line level equipment
Mixers and other line level equipment can be connected using cables with XLR plugs.
• When connecting line level equipment, set the Input Source to Line. (→ Setting input sources)
• Direct input of passive guitars and basses is not supported. Connect these instruments through a mixer
or effects device.
25