Monitoring input/playback sounds
Input/playback sounds can be monitored using headphones, for example, and the volume can be adjusted.
1. Connect headphones, for example, to the PHONE OUT jack.
2. Use to adjust the volume to the headphones or other equipment.
The volume is shown on the display while it is being adjusted.
NOTE:
When monitoring with headphones or other equipment is not necessary, do not connect anything to the
PHONE OUT jack. When nothing is connected to the PHONE OUT jack, the headphone monitoring function is
automatically disabled, which could lengthen continuous battery operation time.
HINT:
The volume output from the PHONE OUT jack is also affected by changing the waveform display
magnification. (→ Waveforms shown when recording)
Adjust the waveform display magnification before adjusting the headphone volume.
47
To Next Page
Loading...
Need help?
General
Weight and Dimensions
