Selecting files for playback
Files can be selected from a list and played.
1. Press .
This opens the Menu Screen.
2. Use / to select “Finder” and press to confirm.
3. Use and to select the file desired for playback and press to confirm.
4. Use / to select “Play” and press to confirm.
The selected file will start playing.
NOTE:
• If the selected file is not valid, an “Invalid File!” message will appear.
• If no playable file exists, a “No File!" message will appear.
• Two files recorded simultaneously by Inputs 1 and 2 when the “File Format” setting was “Mono” will be
shown as a single file in the F3 Finder. (→ Selecting the recording file format (Mono/Stereo))
62
To Next Page
Loading...
