Zoom F3 User Manual

Reducing noise (low-frequency cut)
Low frequencies can be cut to reduce the sound of wind, vocal pops and other noise.
1. Press for the input to set. (→ Selecting inputs for making settings)
This opens the Input Settings Screen.
2. Use / to select “HPF” and press to confirm.
3. Use and to select the cut-off frequency, and press to confirm.
HINT:
This can be set to “Off” or in a range of 10–240 Hz.
36

Zoom F3 Specifications

General

XLR in	Yes
Audio (L/R) out	1
Sample rate	192 kHz
Audio quality	32 bit
Product color	Gray

Weight and Dimensions

Weight	242 g
Dimensions (WxDxH)	75 x 77.3 x 47.8 mm