Setting the date and time (first time starting up)
The first time the power is turned on after purchase, after setting the display language, set the date and
time when the Set Date/Time Screen opens. The date and time are added to recording files.
1. Use and to select the item to set and press to confirm.
2. Use and to change the value and press to confirm.
3. Repeat steps 1–2 to set the date and time.
4. After setting all items, use and to select , and press to confirm.
NOTE:
If power is not supplied for a long time, the date and time data stored in the unit will be reset. If the Set
Date/Time Screen appears during startup, set them again.
HINT:
The date and time setting can also be changed later from the Menu Screen. (→ Setting the date and time)
29
To Next Page
Loading...
