Setting input sources
The input source and phantom power on/off status can be set for each track.
1. Press for the input to set. (→ Selecting inputs for making settings)
This opens the Input Settings Screen.
2. Use / to select “Source” and press to confirm.
3. Use / to select the source and press to confirm.
Item Explanation
Mic
Use when connecting a mic or other equipment with a low input
level.
Mic (+48V)
Use when connecting equipment with mic level input that requires
phantom power.
Line
Use when connecting line level equipment. The input level will be
reduced 20 dB compared to when “Mic” or “Mic (+48V)” is selected.
Line (+48V)
Use when connecting equipment with line level input that requires
phantom power.
NOTE:
• When connecting equipment that is not compatible with phantom power, do not set this to “Mic (+48V)”
or “Line (+48V)”. Doing so could damage the equipment.
• Item names will change to reflect the “Phantom Volt.” Setting. (→ Changing phantom power voltage)
33
To Next Page
Loading...
Need help?
General
Weight and Dimensions
