Playing recordings
Playing recordings
1. Press .
This starts recording. For details about the Playback Screen, see Playback Screen.
Files with the following characteristics can be played.
• 32-bit float WAV files
• Sample rate: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz or 192 kHz
• Number of channels: 1 or 2
NOTE:
• The playing file will be played back repeatedly.
• If the selected file is not valid, an “Invalid File!” message will appear.
• If no playable file exists, a “No File!" message will appear.
HINT:
Files can also be chosen for playback as desired from a list. (→ Selecting files for playback)
2. Press .
Playback stops and the Home Screen opens.
NOTE:
Depending on the “File Format” setting used during recording, headphone and line output will change as
follows during playback. (→ Selecting the recording file format (Mono/Stereo))
• Mono: mono mix
• Stereo: stereo with Input 1 on left channel and Input 2 on right channel
57
To Next Page
Loading...
Need help?
General
Weight and Dimensions
