Zoom F3 User Manual

Disconnecting from an UltraSync BLUE
Removing the BTA-1 will disconnect the F3 and the UltraSync BLUE and stop timecode recording. Pairing
information will be retained even when disconnected.
Checking timecode information
Information about the timecode being received from the UltraSync BLUE can be checked.
1. Press .
This opens the Menu Screen.
2. Use / to select “System” and press to confirm.
3. Use / to select “Timecode” and press to confirm.
87

Zoom F3 Specifications

General

XLR in	Yes
Audio (L/R) out	1
Sample rate	192 kHz
Audio quality	32 bit
Product color	Gray

Weight and Dimensions

Weight	242 g
Dimensions (WxDxH)	75 x 77.3 x 47.8 mm