Enabling stereo monitoring
Use the Stereo Monitor setting to select a mono mix or stereo sound for monitoring Inputs 1 and 2.
1. When connected as an audio interface, press .
This opens the Menu Screen.
2. Use / to select “Stereo Monitor” and press to confirm.
3. Use / to select “Off (Mono Mix)” or “On (Stereo)” and press to confirm.
Setting Explanation
Off (Mono Mix) The signals from Input 1 and 2 will be mixed in mono and can be
monitored through the LINE OUT and PHONE OUT jacks.
On (Stereo) The signals from Input 1 and 2 will be sent separately to left and right
channels and can be monitored through the LINE OUT and PHONE
OUT jacks.
69
To Next Page
Loading...
Need help?
General
Weight and Dimensions
