Adding/deleting notes
Notes can be added and used to play synth sounds using their pitch, length and velocity data.
1. On the Piano Roll Screen, tap to turn this function on ( ) ( is off).
2. Add a note.
Tap the Piano Roll to add a region and note at that position.
HINT:
• The pitch of the note will be the same as on the piano keyboard shown at the left edge. Scroll up/down to
raise/lower the octave.
• When the place where a note will be added is tapped, vertical guidelines will be shown, allowing the
position to be checked as the note is added.
3. Delete a note.
Tap a note to delete it. The remaining region will not be deleted.
111
To Next Page
Loading...
