Using as a control surface
When the R12 is connected by USB and used as an audio interface, its keys and faders can be used to
control DAW transport and mixing operations.
Enabling control surface use
1. Connect to a computer as an audio interface in 2In/4Out mode (→Connecting computers,
smartphones and tablets)
2. Tap .
Tapping this switches the setting.
Setting Explanation
This turns off the control surface function.
This turns on the control surface function.
Making DAW settings
The R12 control surface function conforms to the Mackie Control standard.
In the DAW settings menu, add “Mackie Control” to the “Devices”, and select “ZOOM R12” for MIDI input and
output. For details, see the manual of the DAW being used.
156
To Next Page
Loading...
Need help?
General
