Enabling the loopback function (2In/2Out mode only)
This function allows the playback sound from the computer, smartphone or tablet and the R12 inputs to be
mixed and sent back (looped back) to the computer, smartphone or tablet.
This function can be used, for example, to add narration to music played back from a computer and record
the mix or stream it on the computer.
1. Tap on the audio interface Level Meter View Screen.
Tapping this switches the setting.
Setting Explanation
This turns off the Loopback function.
This turns on the Loopback function.
Setting the Comp/Limiter/Gate function
Settings can be made for the Comp/Limiter/Gate function used on sounds input to the R12.
1. Tap on the audio interface Level Meter View Screen.
This opens a screen to set the Comp/Limiter/Gate function.
See Using the Comp/Limiter/Gate function for details about making settings.
155
To Next Page
Loading...
