Using the tuner
Use the tuner function to tune guitars and other instruments.
1. Tap “Tuner” on the Project Settings Screen (→ Opening the screen where various project settings can
be made).
This opens the Tuner Screen.
2. On the Input Routing Screen, select the input that is connected to the guitar, bass or other instrument
that you want to tune (→ Enabling tracks for recording).
3. Play the open string that you want to tune and adjust its pitch.
The pitch detuning with the nearest note name or string number will be shown.
Using the chromatic tuner Using other tuners
HINT:
• can also be tapped on the patch memory Edit Screen to open the Tuner Screen. (→ Opening the
patch memory Edit Screen)
• On the Tuner Screen, the type can be selected (→ Selecting the tuner type), the standard pitch can
be changed (→ Setting the standard pitch of the tuner) and flat tunings can be selected (→ Using flat
tunings).
50
To Next Page
Loading...
