Making preparations
Inserting microSD cards
1. Turn the power off and then open the microSD card slot cover.
2. Insert the microSD card into the microSD card slot.
To remove a microSD card, push it further into the slot and then pull it out.
NOTE:
• Cards that conform to SDHC and SDXC specifications are supported.
• Always make certain that the power is off when inserting or removing a microSD card. Inserting or
removing a card while the power is on could result in data loss.
• When inserting a microSD card, be sure to insert the correct end with the top side up.
• Recording and playback are not possible when a microSD card is not loaded in the R12.
• After purchasing a new microSD card, always format it using the R12 to maximize performance. (→
Formatting microSD cards)
24
To Next Page
Loading...
