Zoom MultiTrak R12 User Manual

Changing the snap setting
The snap setting used for the entire project can be changed.
If this is “On”, notes and regions will be aligned to ruler increments when moved (→ Control Bar overview).
1. Tap “On” or “Off” for “Snap” on the Project Settings Screen (→ Opening the screen where various
project settings can be made).
Setting Explanation
Off This turns off the snap function.
On This turns on the snap function.
49

Zoom MultiTrak R12 Specifications

General

Brand	Zoom
Model	MultiTrak R12
Category	Recording Equipment
Language	English