Adjusting the volume balance of the MASTER and CLICK signals
output to headphones
When monitoring with headphones, the volume balance between the MASTER and CLICK output signals can
be adjusted.
1. Set to PHONES.
When set to OUTPUT + PHONES, the balance adjusted using the track faders is output to both the
OUTPUT and PHONES jacks.
2. Turn to adjust the balance.
• Turn right to increase the CLICK volume. When turned all the way to the right, only the CLICK will be
output.
• Turn left to increase the MASTER volume. When turned all the way to the left, only the MASTER will
be output.
48
To Next Page
Loading...
Need help?
General
