3. Tap where the rendered stereo WAV file should be saved.
Setting Explanation
To SD Card This renders to the microSD card.
To USB Memory This renders to the USB flash drive.
4. Input the file name.
See Character Input Screen overview for how to input characters.
NOTE:
• An error message will appear if a file with the same name already exists. If this happens, change the file
name.
• Exporting is not possible if the microSD card or USB flash drive does not have enough open space.
5. When “Done” appears, tap “Close”.
This completes rendering of the WAV file and reopens the Project Option Screen.
145
To Next Page
Loading...
