Level Meter View Screen
This screen shows the level meters and faders for all tracks.
This screen makes observing the volume of all tracks easy, so it is useful for recording multiple channels
simultaneously and balancing the mix.
❶
Control Bar
This shows the recording/playback position and various buttons. See the Control Bar overview for
details.
❷
Input indicators
The show the input jack (1/2) track assignments.
❸
Clipping indicators
These light red if input/playback signal levels are clipping after fader adjustment.
Pressing , starting recording or changing screens will clear these indicators.
❹
Peak indicators
These retain the peak levels of input/playback signals for a set amount of time after fader adjustment.
❺
Track level meters
These show the input/playback signal levels after fader adjustment.
❻
Tracks
These show the track numbers.
Tap a track to open the Track Settings Screen
❼
Track faders
These show the current fader position settings.
❽
Track ghost faders
When the positions of physical faders and fader settings are different because the screen has been
switched, for example, these show the physical fader positions.
To change the fader setting value, move the fader on the unit to the current fader position. This will
cause it to reflect the unit fader position.
❾
Phantom power indicator
When phantom power is on, this shows the input that is receiving it.
16
To Next Page
Loading...
Need help?
General
