Zoom MultiTrak R12 - Turning the Power Off

NOTE:
• The power will automatically turn off if it is unused for 10 hours. To keep the power on at all times,
disable the automatic power saving function. (→ Setting the Auto Power Off function)
• If “No SD Card!” appears on the display, confirm that a microSD card is inserted properly. (→ Inserting
microSD cards)
• If “Invalid SD card!” appears on the display, the card is not formatted correctly. Format the microSD card
(→ Formatting microSD cards) or load a different microSD card (→ Inserting microSD cards).
Turning the power off
1. Minimize the volume of output devices connected to the R12.
2. Turn off the output devices connected to the R12.
3. Press until “Goodbye! See You!” is shown.
The touchscreen display will turn off.
29