About these instructions
5
1 About these instructions
These instructions serve as the working basis for the specialist service technician. Carefully read
through and follow the instructions. Ensure optimal and safe work with the product from the start.
The most current version is found in the reseller area.
1.1 Scope
These instructions are valid for the following products:
• G3 cutter
1.2 Presentation conventions
The representation of the product may deviate from the original. In part, simplified representations or
cross-sectional views are used for illustration. In some illustrations, other product variations are used
as examples, insofar as there are no significant differences from the delivered product.
1.3 Legal notice
The information in this publication is intended for informational purposes only and is subject to
change without notice. It does not constitute an obligation on the part of Zünd Systemtechnik AG. No
part of this document may be copied, distributed, used or disclosed to third parties without express
permission. Offenders will be liable for damages.
1.4 Other applicable documents
• Mounting instructions G3
• Mounting instructions cutter extension G3/D3
• Operating instructions G3
The most current version is found in the reseller area.
To Next Page
Loading...
