Zünd G3 - Checklist

Initial commissioning
98
13.5 Checklist
Name of the test point (chapter) Note/adjusting value
S-box, electronics unit
- The rotary switch of the safety relay in the S-box has the
setting "6".
- Bridge plug in the S20 slot on ACS_BF_BOARD is
removed.
11.3 Checking the pillar deflection
- Front left X/Y direction
- Rear left X/Y direction
- Rear right X/Y direction
- Front right X/Y direction
11.4 Checking the light curtain (with test piece)
- Front
- Left
- Rear
- Right
Comment
Place, date Signature of technician
Place, date Signature of customer