Chapter 56 PPPoE IA Commands
Ethernet Switch CLI Reference Guide
228
• The Switch discards PADO and PADS packets which are sent from a PPPoE server but
received on an untrusted port.
56.2 Command Summary
The following section lists the commands for this feature.
Table 126 PPPoE Intermediate Agent Command Summary
COMMAND DESCRIPTION M P
clear pppoe intermediate-agent
statistics
Removes all statistics records of PPPoE packets on the
Switch.
E13
clear pppoe intermediate-agent
statistics vlan <vlan-list>
Removes statistics records of PPPoE packets for the
specified VLAN(s).
E13
interface port-channel <port-
list>
Enters config-interface mode for the specified port(s). C 13
pppoe intermediate-agent
trust
Sets the specified port(s) as PPPoE IA trusted port(s). C 13
pppoe intermediate-agent
format-type circuit-id
string <string>
Specify a string the Switch adds into the Agent Circuit ID sub-
option for PPPoE discovery packets received on this port.
Spaces are allowed.
string: up to 63 ASCII characters
C13
pppoe intermediate-agent
format-type remote-id string
<string>
Specify a string the Switch adds into the Agent Remote ID
sub-option for PPPoE discovery packets received on this
port. Spaces are allowed.
string: up to 63 ASCII characters
C13
pppoe intermediate-agent
vlan <vlan-id> format-type
circuit-id string <string>
Specify a string the Switch adds into the Agent Circuit ID sub-
option for PPPoE discovery packets received on this VLAN
on the specified port. Spaces are allowed.
The Circuit ID you configure for a specific VLAN on a port has
the highest priority.
C13
pppoe intermediate-agent
vlan <vlan-id> format-type
remote-id string <string>
Specify a string the Switch adds into the Agent Remote ID
sub-option for PPPoE discovery packets received on this
VLAN on the specified port. Spaces are allowed.
The Remote ID you configure for a specific VLAN on a port
has the highest priority.
C13
no pppoe intermediate-agent
trust
Sets the specified port(s) PPPoE IA untrusted port(s). C 13
no pppoe intermediate-agent
format-type circuit-id
Disables the PPPoE IA Circuit ID settings for the specified
port(s).
C13
no pppoe intermediate-agent
format-type remote-id
Disables the PPPoE IA Remote ID settings for the specified
port(s).
C13
no pppoe intermediate-agent
vlan <vlan-id> format-type
circuit-id
Disables the PPPoE IA Circuit ID settings for the specified
port(s) on the specified VLAN(s).
C13
no pppoe intermediate-agent
vlan <vlan-id> format-type
remote-id
Disables the PPPoE IA Remote ID settings for the specified
port(s) on the specified VLAN(s).
C13
no pppoe intermediate-agent Disables PPPoE IA globally. C 13
no pppoe intermediate-agent vlan
<vlan-list> remote-id
Disables the PPPoE IA Remote ID settings for the specified
VLAN(s).
C13