Chapter 34 Object
ZyWALL ATP Series User’s Guide
588
Figure 380 Configuration > Object > User/Group > Group
The following table describes the labels in this screen. See Section 34.2.3.1 on page 588 for more
information as well.
34.2.3.1 Group Add/Edit Screen
The Group Add/Edit screen allows you to create a new user group or edit an existing one. To access this
screen, go to the Group screen (see Section 34.2.3 on page 587), and click either the Add icon or an
Edit icon.
Figure 381 Configuration > Object > User/Group > Group > Add
Table 237 Configuration > Object > User/Group > Group
LABEL DESCRIPTION
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry’s settings.
Remove To remove an entry, select it and click Remove. The Zyxel Device confirms you want to remove
it before doing so. Removing a group does not remove the user accounts in the group.
References Select an entry and click References to open a screen that shows which settings use the entry.
# This field is a sequential value, and it is not associated with a specific user group.
Group Name This field displays the name of each user group.
Description This field displays the description for each user group.
Member This field lists the members in the user group. Each member is separated by a comma.
Reference This displays the number of times an object reference is used in a profile.
To Next Page
Loading...
