Chapter 6 Configuration Basics
ZyWALL USG 100/200 Series User’s Guide
110
1 Create a user account for Bill if you have not done so already (Configuration >
Object > User/Group).
2 Create a schedule for the work day (Configuration > Object > Schedule).
3 Click Configuration > Anti-X > Content Filter > Filter Profile. Click the Add
icon to go to the screen where you can configure a category-based profile.
4 Name the profile and enable it.
5 Enable the external web filter service.
6 Decide what to do for matched web sites (Block in this example), unrated web
sites and what to do when the category-based content filtering service is not
available.
7 Select the Arts/Entertainment category (you need to click Advanced to display
it) and click OK.
8 Click General to go to the content filter general configuration screen.
9 Enable the content filter.
10 Add a policy that uses the schedule, the filtering profile and the user that you
created.
6.5.23 Anti-Spam
Use anti-spam to detect and take action on spam mail.
6.5.24 Device HA
To increase network reliability, device HA lets a backup ZyWALL automatically take
over if a master ZyWALL fails.
Example: See Chapter 7 on page 115.
MENU ITEM(S)
Configuration > Anti-X > Anti-Spam
PREREQUISITES
Zones
MENU ITEM(S)
Configuration > Device HA
PREREQUISITES
Interfaces (with a static IP address), to-ZyWALL firewall
To Next Page
Loading...
