ZyXEL Communications ZyWALL USG 100 Series - Date and Time

Chapter 50 System
ZyWALL USG 100/200 Series User’s Guide
817
50.3 Date and Time
For effective scheduling and logging, the ZyWALL system time must be accurate.
The ZyWALL’s Real Time Chip (RTC) keeps track of the time and date. There is also
a software mechanism to set the time manually or get the current time and date
from an external server.
To change your ZyWALL’s time based on your local time zone and date, click
Configuration > System > Date/Time. The screen displays as shown. You can
manually set the ZyWALL’s time and date or have the ZyWALL get the date and
time from a time server.
Figure 535 Configuration > System > Date and Time
The following table describes the labels in this screen.
Table 233 Configuration > System > Date and Time
LABEL DESCRIPTION
Current Time and
Date
Current Time This field displays the present time of your ZyWALL.
Current Date This field displays the present date of your ZyWALL.
Time and Date
Setup