Chapter 32 Application Patrol
ZyWALL USG 100/200 Series User’s Guide
565
Click Configuration > App Patrol > Common to open the following screen.
Figure 416 Configuration > App Patrol > Common
The following table describes the labels in this screen. See Section 32.3.1 on page
565 for more information as well.
32.3.1 The Application Patrol Edit Screen
Use this screen to edit the settings for an application. To access this screen, go to
the application patrol Common, Instant Messenger, Peer to Peer, VoIP, or
Table 147 Configuration > App Patrol > Common
LABEL DESCRIPTION
Edit Double-click an entry or select it and click Edit to open a screen where
you can modify the entry’s settings.
Activate To turn on an entry, select it and click Activate.
Inactivate To turn off an entry, select it and click Inactivate.
# This field is a sequential value, and it is not associated with a specific
application.
Status The activate (light bulb) icon is lit when the entry is active and dimmed
when the entry is inactive.
Service This field displays the name of the application.
Default Access This field displays what the ZyWALL does with packets for this
application. Choices are: forward, drop, and reject.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to return the screen to its last-saved settings.
To Next Page
Loading...
