ZyXEL Communications ZyWALL USG 100 Series - Creating;Editing a Web-Based SSL Application Object

Chapter 48 SSL Application
ZyWALL USG 100/200 Series User’s Guide
800
The following table describes the labels in this screen.
48.2.1 Creating/Editing a Web-based SSL Application Object
A web-based application allows remote users to access an application via standard
web browsers.
To configure a web-based application, click the Add or Edit button in the SSL
Application screen and select Web Application in the Type field to display the
configuration screen as shown.
Figure 529 Configuration > Object > SSL Application > Add/Edit: Web Application
Table 227 Configuration > Object > SSL Application
LABEL DESCRIPTION
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to be able to modify the
entry’s settings.
Remove To remove an entry, select it and click Remove. The ZyWALL confirms you
want to remove it before doing so.
Object
Reference
s
Select an entry and click Object References to open a screen that shows
which settings use the entry. See Section 13.3.2 on page 306 for an example.
# This field displays the index number.
Name This field displays the name of the object.
Address This field displays the IP address/URL of the application server or the location
of a file share.
Type This field shows whether the object is a file-sharing, web-server, Outlook Web
Access, Virtual Network Computing, or Remote Desktop Protocol SSL
application.