ZyXEL Communications ZyWALL USG 100 Series - The Other Applications Add;Edit Screen

Chapter 32 Application Patrol
ZyWALL USG 100/200 Series User’s Guide
575
32.4.1 The Other Applications Add/Edit Screen
The Other Configuration Add/Edit screen allows you to create a new condition
or edit an existing one. To access this screen, go to the Other Protocol screen
(see Section 32.4 on page 572), and click either the Add icon or an Edit icon.
Figure 420 AppPatrol > Other > Edit
The following table describes the labels in this screen.
Log Select whether to have the ZyWALL generate a log (log), log and alert
(log alert) or neither (no) when traffic matches this policy. See Chapter
51 on page 865 for more on logs.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to return the screen to its last-saved settings.
Table 150 AppPatrol > Other (continued)
LABEL DESCRIPTION
Table 151 AppPatrol > Other > Edit
LABEL DESCRIPTION
Create new
Object
Use to configure any new settings objects that you need to use in this
screen.
Enable Select this check box to turn on this policy.
Port Use this field to specify a specific port number to which to apply this
policy. Type zero, if this policy applies for every port number.