ZyXEL Communications ZyWALL USG 100 Series - The Dynamic DNS Add;Edit Screen

Chapter 18 DDNS
ZyWALL USG 100/200 Series User’s Guide
414
18.2.1 The Dynamic DNS Add/Edit Screen
The DDNS Add/Edit screen allows you to add a domain name to the ZyWALL or
to edit the configuration of an existing domain name. Click Configuration >
Network > DDNS and then an Add or Edit icon to open this screen.
Figure 314 Configuration > Network > DDNS > Add
The following table describes the labels in this screen.
Table 105 Configuration > Network > DDNS > Add
LABEL DESCRIPTION
Show Advance
Settings / Hide
Advance
Settings
Click this button to display a greater or lesser number of configuration
fields.
Enable DDNS
Profile
Select this check box to use this DDNS entry.
Profile Name When you are adding a DDNS entry, type a descriptive name for this
DDNS entry in the ZyWALL. You may use 1-31 alphanumeric characters,
underscores(
_), or dashes (-), but the first character cannot be a
number. This value is case-sensitive.
This field is read-only when you are editing an entry.
DDNS Type Select the type of DDNS service you are using.