ZyXEL Communications ZyWALL USG 100 Series - Configure Device HA on the Master Zywall

Chapter 7 Tutorials
ZyWALL USG 100/200 Series User’s Guide
179
7.15.2 Configure Device HA on the Master ZyWALL
1 Log into ZyWALL A (the master) and click Configuration > Device HA > Active-
Passive Mode. Double-click lan1’s entry.
2 Configure 192.168.1.3 as the Management IP and 255.255.255.0 as the
Manage IP Subnet Mask. Click OK.
Figure 146 Configuration > Device HA > Active-Passive Mode > Edit: Master
ZyWALL Example