ZyXEL Communications ZyWALL USG 100 Series - Chapter 45 Authentication Method; Overview; What You Can Do in this Chapter; Before You Begin

ZyWALL USG 100/200 Series User’s Guide
765
CHAPTER 45
Authentication Method
45.1 Overview
Authentication method objects set how the ZyWALL authenticates wireless, HTTP/
HTTPS clients, peer IPSec routers (extended authentication), and L2TP VPN
clients. Configure authentication method objects to have the ZyWALL use the local
user database, and/or the authentication servers and authentication server groups
specified by AAA server objects. By default, user accounts created and stored on
the ZyWALL are authenticated locally.
45.1.1 What You Can Do in this Chapter
•Use the Configuration > Object > Auth. Method screens (Section 45.2 on
page 766) to create and manage authentication method objects.
Finding Out More
See Section 7.7.3 on page 148 for an example of how to set up user
authentication using a radius server.
45.1.2 Before You Begin
Configure AAA server objects (see Chapter 44 on page 755) before you configure
authentication method objects.
45.1.3 Example: Selecting a VPN Authentication Method
After you set up an authentication method object in the Auth. Method screens,
you can use it in the VPN Gateway screen to authenticate VPN users for
establishing a VPN connection. Refer to the chapter on VPN for more information.
Follow the steps below to specify the authentication method for a VPN connection.
1 Access the Configuration > VPN > IPSec VPN > VPN Gateway > Edit screen.
2 Click Show Advance Setting and select Enable Extended Authentication.