ZyXEL Communications ZyWALL USG 100 Series - Policy Route Edit Screen

Chapter 15 Policy and Static Routes
ZyWALL USG 100/200 Series User’s Guide
383
15.2.1 Policy Route Edit Screen
Click Configuration > Network > Routing to open the Policy Route screen.
Then click the Add or Edit icon to open the Policy Route Edit screen. Use this
screen to configure or edit a policy route.
Figure 299 Configuration > Network > Routing > Policy Route > Add
The following table describes the labels in this screen.
Table 91 Configuration > Network > Routing > Policy Route > Edit
LABEL DESCRIPTION
Create new
Object
Use this to configure any new settings objects that you need to use in
this screen.
Configuration
Enable Select this to activate the policy.
Description Enter a descriptive name of up to 31 printable ASCII characters for the
policy.
Criteria
User Select a user name or user group from which the packets are sent.