ZyXEL Communications ZyWALL USG 100 Series - Allow HTTPS Administrator Access Only from the LAN

Chapter 7 Tutorials
ZyWALL USG 100/200 Series User’s Guide
161
user access (logging into SSL VPN for example). See Chapter 50 on page 815 for
more on service control.
The To-ZyWALL firewall rules apply to any kind of HTTP or HTTPS connection to the
ZyWALL. They do not distinguish between administrator management access and
user access. If you configure service control to allow management or user HTTP or
HTTPS access, make sure the firewall is not configured to block that access.
7.10.1 Allow HTTPS Administrator Access Only From the
LAN
This example configures service control to block administrator HTTPS access from
all zones except the LAN1.
1 Click Configuration > System > WWW.
2 In HTTPS Admin Service Control, click the Add icon.
Figure 120 Configuration > System > WWW
3 In the Zone field select LAN1 and click OK.
Figure 121 Configuration > System > WWW > Service Control Rule Edit