Chapter 32 Application Patrol
ZyWALL USG 100/200 Series User’s Guide
561
• Enable maximize bandwidth usage so the SIP traffic can borrow unused
bandwidth.
Figure 411 SIP Any to WAN Bandwidth Management Example
32.1.3.3 SIP WAN to Any Bandwidth Management Example
You also create a policy for calls coming in from the SIP server on the WAN. It is
the same as the SIP Any to WAN policy, but with the directions reversed (WAN to
Any instead of Any to WAN).
32.1.3.4 HTTP Any to WAN Bandwidth Management Example
• Inbound traffic gets more bandwidth as the local users will probably download
more than they upload (and the ADSL connection supports this).
• Second highest priority (2). Set policies for other applications (except SIP) to
lower priorities so the local users’ HTTP traffic gets sent before non-SIP traffic.
• Enable maximize bandwidth usage so the HTTP traffic can borrow unused
bandwidth.
Figure 412 HTTP Any to WAN Bandwidth Management Example
Inbound: 200 kbps
Outbound: 200 kbps
BWM
BWM
Inbound: 500 kbps
Outbound: 200 kbps
BWM
BWM
To Next Page
Loading...
