ZyXEL Communications ZyWALL USG 100 Series - How to Set up an Ipsec VPN Tunnel

Chapter 7 Tutorials
ZyWALL USG 100/200 Series User’s Guide
141
7.4.3.4 Wireless Clients Use the WLAN Interface
A login screen displays when the wireless client attempts to connect to the
wireless interface. Enter the username and password and click OK.
Figure 95 Funk Odyssey Access Wireless Client Login Example
7.5 How to Set Up an IPSec VPN Tunnel
This example shows how to use the IPSec VPN configuration screens to create the
following VPN tunnel, see Section 5.4 on page 80 for details on the VPN quick
setup wizard.
Figure 96 VPN Example
In this example, the ZyWALL is router X (1.2.3.4), and the remote IPSec router is
router Y (2.2.2.2). Create the VPN tunnel between ZyWALL X’s LAN subnet
(192.168.1.0/24) and the LAN subnet behind peer IPSec router Y (172.16.1.0/
24).
192.168.1.0/24
172.16.1.0/24
1.2.3.4
2.2.2.2
LAN
LAN