Chapter 25 IPSec VPN
ZyWALL USG 100/200 Series User’s Guide
499
Concentrator summary screen (see Section 25.4 on page 495), and click either
the Add icon or an Edit icon.
Figure 361 Configuration > VPN > IPSec VPN > Concentrator > Edit
Each field is described in the following table.
25.5 IPSec VPN Background Information
Here is some more detailed IPSec VPN background information.
Table 132 VPN > IPSec VPN > Concentrator > Edit
LABEL DESCRIPTION
Name Enter the name of the concentrator. You may use 1-31 alphanumeric
characters, underscores(_), or dashes (-), but the first character
cannot be a number. This value is case-sensitive.
Member Select the concentrator’s IPSec VPN connection policies.
Note: You must disable policy enforcement in each member. See
Section 25.2.1 on page 476.
IPSec VPN connection policies that do not belong to a VPN concentrator
appear under Available. Select any VPN connection policies that you
want to add to the VPN concentrator and click the right arrow button to
add them.
The VPN concentrator’s member VPN connections appear under
Member. Select any VPN connections that you want to remove from
the VPN concentrator, and click the left arrow button to remove them.
OK Click OK to save your changes in the ZyWALL.
Cancel Click Cancel to exit this screen without saving.
To Next Page
Loading...
