ZyXEL Communications ZyWALL USG 100 Series - Application Patrol Statistics; Application Patrol Statistics: General Setup

Chapter 10 Monitor
ZyWALL USG 100/200 Series User’s Guide
256
10.11 Application Patrol Statistics
This screen displays a bandwidth usage graph and statistics for selected protocols.
Click Monitor > AppPatrol Statistics to open the following screen.
10.11.1 Application Patrol Statistics: General Setup
Use the top of the Monitor > AppPatrol Statistics screen to configure what to
display.
Figure 242 Monitor > AppPatrol Statistics: General Setup
The following table describes the labels in this screen.
Signal Quality This displays the strength of the signal. The signal strength mainly
depends on the antenna output power and the distance between your
ZyWALL and the service provider’s base station.
More Info. This field displays other details about the 3G connection.
Table 39 Monitor > System Status > Cellular Status (continued)
LABEL DESCRIPTION
Table 40 Monitor > AppPatrol Statistics: General Settings
LABEL DESCRIPTION
Refresh
Interval
Select how often you want the statistics display to update.
Display
Protocols
Select the protocols for which to display statistics.
Select All selects all of the protocols.
Clear All clears all of the protocols.
Click Expand to display individual protocols. Collapse hides them.
Statistics for the selected protocols display after you click Apply.