Chapter 36 Content Filtering
ZyWALL USG 100/200 Series User’s Guide
669
36.6 Content Filter Customization Screen
Click Configuration > Anti-X > Content Filter > Filter Profile > Add or Edit
> Customization to open the Customization screen. You can create a list of
good (allowed) web site addresses and a list of bad (blocked) web site addresses.
You can also block web sites based on whether the web site’s address contains a
keyword. Use this screen to add or remove specific sites or keywords from the
filter list.
Figure 456 Configuration > Anti-X > Content Filter > Filter Profile > Customization
The following table describes the labels in this screen.
Table 180 Configuration > Anti-X > Content Filter > Filter Profile > Customization
LABEL DESCRIPTION
Name Enter a descriptive name for this content filtering profile
name. You may use 1-31 alphanumeric characters,
underscores(
_), or dashes (-), but the first character cannot
be a number. This value is case-sensitive.
Enable Custom Service Select this check box to allow trusted web sites and block
forbidden web sites. Content filter list customization may be
enabled and disabled without re-entering these site names.
To Next Page
Loading...
