ZyXEL Communications ZyWALL USG 100 Series - Page 131

Chapter 7 Tutorials
ZyWALL USG 100/200 Series User’s Guide
131
3 Select WPA2 as the security type and click Next.
Figure 77 ZyXEL Wireless Client > Profile: Security Type
4 Set the encryption type to TKIP and the EAP type to TTLS. Configure wlan_user
as the Login Name and enter the account’s password (also wlan_user in this
example. In TTLS Protocol, select PAP. Click Next.
Figure 78 ZyXEL Wireless Client > Profile: Security Settings