ZyXEL Communications ZyWALL USG 100 Series - Page 182

Chapter 7 Tutorials
ZyWALL USG 100/200 Series User’s Guide
182
4 Set the Device Role to Backup. Activate monitoring for the lan1 and wan1
interfaces. Set the Synchronization Server Address to 192.168.1.1, the Port
to 21, and the Password to “mySyncPassword”. Select Auto Synchronize and
set the Interval to 60. Click Apply.
Figure 150 Configuration > Device HA > Active-Passive Mode: Backup ZyWALL
Example
5 Click the General tab. Turn on device HA and click Apply.
Figure 151 Configuration > Device HA > General: Master ZyWALL Example