ZyXEL Communications ZyWALL USG 100 Series - Page 56

Chapter 3 Web Configurator
ZyWALL USG 100/200 Series User’s Guide
56
3.3.2.4 Maintenance Menu
Use the maintenance menu screens to manage configuration and firmware files,
run diagnostics, and reboot or shut down the ZyWALL.
Console
Speed
Set the console speed.
DNS Configure the DNS server and address records for
the ZyWALL.
WWW Service Control Configure HTTP, HTTPS, and general
authentication.
Login Page Configure how the login and access user screens
look.
SSH Configure SSH server and SSH service settings.
TELNET Configure telnet server settings for the ZyWALL.
FTP Configure FTP server settings.
SNMP Configure SNMP communities and services.
Dial-in Mgmt. Configure settings for an out of band management
connection through a modem connected to the
AUX port.
Vantage CNM Configure and allow your ZyWALL to be managed
by the Vantage CNM server.
Language Select the Web Configurator language.
Log & Report
Email Daily
Report
Configure where and how to send daily reports and
what reports to send.
Log Setting Configure the system log, e-mail logs, and remote
syslog servers.
Table 6 Configuration Menu Screens Summary (continued)
FOLDER OR
LINK
TAB FUNCTION
Table 7 Maintenance Menu Screens Summary
FOLDER OR
LINK
TAB FUNCTION
File Manager Configuration
File
Manage and upload configuration files for the
ZyWALL.
Firmware
Package
View the current firmware version and to upload
firmware.
Shell Script Manage and run shell script files for the ZyWALL.
Diagnostics Diagnostic Collect diagnostic information.
Packet Capture Capture packets for analysis.
Reboot Restart the ZyWALL.
Shutdown Turn off the ZyWALL.