ZyXEL Communications ZyWALL USG 100 Series - Page 947

Appendix A Log Descriptions
ZyWALL USG 100/200 Series User’s Guide
947
AV signature update has
failed. Can not update
last update time.
The anti-virus signatures update did not succeed.
AV signature update has
failed. (Replacement
failure)
Anti-virus signatures update failed because the ZyWALL was
not able to replace the old set of anti-virus signatures with
the new one.
AV signature update has
failed. (Unknown
signature package).
Anti-virus signatures update failed because the ZyWALL was
not able to identify whether the downloaded signature
package was an incremental or full update.
AV signature update
from version %s to
version %s has
succeeded
The ZyWALL updated the anti-virus signatures from the
listed version to the second listed version.
AV signature update has
failed. (File damaged)
An anti-virus signatures update failed because the signature
file has been corrupted.
AV signature update has
failed. (Memory not
enough)
An anti-virus signatures update failed because the ZyWALL
did not have enough system resources free to finish the
signature update.
AV signature size is
over system limitation
An anti-virus signatures update failed because the anti-virus
signature file was too large.
AV signature update has
failed.
An anti-virus signatures update failed for unknown reasons.
Anti-Virus signatures
missing, refer to your
user documentation to
recover the default
database file.
When the ZyWALL started it could not find the anti-virus
signature file. See the CLI reference guide for how to
restore the default system database.
Update signature
version has failed.
An attempt to update the anti-virus signature version failed.
cannot update signature version
AV signature update
from %s version %s to
%s version %s has
succeeded.
The anti-virus signatures have been updated.
1st %s: The anti-virus engine type before the update.
2nd %s: The signature version before the update.
3rd %s: The anti-virus engine type after the update.
4th %s: The signature version after the update.
AV signature size is
over system limitation
The anti-virus signature file size is too large.
AV has been activated Anti-virus has been turned on.
AV has been deactivated Anti-virus has been turned off.
Anti-Virus rule %d has
been moved to %d
The anti-virus rule with the specified index number (1st %d)
was moved to the specified index number (2nd %d).
Anti-Virus rules have
been flushed.
All of the anti-virus rules have been deleted.
Anti-Virus rule %d has
been deleted.
The anti-virus rule of the specified number has been
deleted.
Table 283 Anti-Virus Logs (continued)
LOG MESSAGE DESCRIPTION