ZyXEL Communications ZyWALL USG 100 Series - Page 960

Appendix A Log Descriptions
ZyWALL USG 100/200 Series User’s Guide
960
Protocol %s has been
enabled.
The listed protocol has been turned on in the application
patrol.
Protocol %s has been
disabled.
The listed protocol has been turned off in the application
patrol.
Classification mode of
protocol %s has been
modified to portless.
The device will now use the portless classification mode to
identify the listed protocol’s traffic.
Classification mode of
protocol %s has been
modified to portbase.
The device will now use the port-based classification mode
to identify the listed protocol’s traffic.
Bandwidth graph of
protocol %s has been
enabled.
The bandwidth graph has been turned on for the listed
protocol’s traffic.
Bandwidth graph of
protocol %s has been
disabled.
The bandwidth graph has been turned off for the listed
protocol’s traffic.
Default port %s of
protocol %s has been
added.
The listed default port (first %s) has been added for the
listed protocol (second %s).
Default port %s of
protocol %s has been
removed.
The listed default port (first %s) has been deleted for the
listed protocol (second %s).
Rule %s:%s has been
moved to index %s.
An application patrol rule has been moved.
1st %s: Protocol name
2nd %s: From rule index number
3rd %s: To rule index number
Rule %s:%s has been
removed.
An application patrol rule has been deleted.
1st %s: Protocol name
2nd %s: From rule index number
3rd %s: To rule index number
System fatal error:
60011001.
The device failed to initiate the application patrol daemon.
System fatal error:
60011002.
The device failed to get the application patrol protocol list.
System fatal error:
60011003.
The device failed to initiate XML.
System fatal error:
60011004.
The device failed to turn application patrol off while the
system was initiating.
Table 287 Application Patrol (continued)
MESSAGE EXPLANATION